Industrial Blasting, Coating & Painting Across Southwest and Northern Michigan

BlasTek provides industrial blasting, coating, and painting across Southwest and Northern Michigan. From our West Michigan facilities, mobile crews travel the region to prepare and protect tanks, structural steel, bridges, and process equipment to SSPC, NACE, and AMPP standards. The full range of services, including sandblasting, dustless and dry ice blasting, tank lining, industrial painting, and powder coating, comes to your site or runs through our shop. Call (616) 243-7550 for a quote or on-site assessment.

Regional Mobile Blasting, Coating & Painting

Michigan’s industrial base stretches far beyond the metros. The southwest lakeshore adds appliance manufacturing, agriculture, and marine assets, with chloride exposure near the water; the north brings municipalities, energy infrastructure, pulp and paper, and tourism-region facilities. All of it must stand up to Michigan winters and freeze-thaw cycling. Our crews stage along I-94 and US-31 for the lakeshore counties and run US-131 and M-115 north to Cadillac, Traverse City, and beyond, bringing shop-grade quality control to sites across the region.

Industrial Blasting

Industrial Blasting, Coating & Painting SW & Northern Michigan BlasTekField surface prep only works when it holds the same standard as shop work, and BlasTek makes sure it does. Our crews strip contamination and cut the specified profile on tanks, steel, and equipment wherever they sit, using industrial sandblasting and mobile sandblasting rigs built for travel. For occupied buildings and environmentally sensitive lakeshore or northern sites, dustless blasting cuts airborne particles at the source. We bring portable blast pots, compressors, media, and engineered containment, verifying profile and cleanliness on every job.

Industrial Coating

Coatings across Southwest and Northern Michigan have to handle freeze-thaw, moisture, and near the lakeshore, chloride attack, so system selection matters. BlasTek applies immersion-grade tank linings and high-performance protective coatings rated for the actual exposure. Our inspectors verify film thickness and perform holiday testing on immersion assets, so the barrier is continuous. We coat on-site or in our controlled shop, depending on what the asset allows.

Industrial Painting

BlasTek’s industrial painting protects steel, tanks, and equipment against some of the state’s harshest conditions. We apply paint systems to specification with continuous film-thickness monitoring, in the field or in the shop. Fabrications that can travel run through our shop painting and Grand Rapids powder coating facilities for durable, high-throughput finishes. Mobile crews handle on-site painting for the fixed assets that define northern and lakeshore infrastructure.

Full List of Services

BlasTek is a single-source blasting, coating, and painting contractor, so one accountable team can cover surface prep through finish for Southwest and Northern Michigan projects. Field crews handle on-site work at your facility, and our shops take on parts and fabrications that can travel. Follow any service below for full details, standards, and process on its dedicated page. Choose a focused service or combine several into one scope.

Request a Quote or On-Site Assessment

Ready to protect your Southwest and Northern Michigan assets? Call 616-243-7550 for an immediate answer or submit a contact form to request a quote or schedule an on-site assessment. Our team will evaluate your substrate and service conditions, recommend the right blasting, coating, or painting approach, and provide a detailed estimate.

Frequently Asked Questions – Southwest and Northern Michigan

These are common questions about BlasTek’s blasting, coating, and painting services in Southwest and Northern Michigan. For anything specific to your project, reach out for a direct answer.

Does BlasTek travel for on-site projects across Michigan?
Yes. Our mobile field service teams operate across Southwest and Northern Michigan, bringing blast equipment, containment, media, and coating crews directly to sites for projects too large or too fixed to bring to the shop.
How do you protect assets from Michigan’s freeze-thaw and lakeshore conditions?
We specify coating systems rated for the actual service environment, including chloride and moisture exposure near the lakeshore, and prepare surfaces to the cleanliness and profile those systems require, which determines long-term durability.
Can you blast inside occupied or sensitive buildings up north?
Yes. Our dustless blasting suppresses airborne particles at the source, cutting dust rates significantly, which makes it suitable for occupied buildings and environmentally sensitive sites where open-air blasting isn’t permitted.
Is field work held to the same standard as shop work?
Yes. Our field crews apply the same inspection rigor as our shops – profile measurement, soluble-salt testing, and film-thickness monitoring – so on-site results meet specifications just as controlled shop work does.

Industries We Serve

BlasTek specializes in high-performance dry ice blasting and industrial coatings engineered for sensitive and demanding environments. We provide expert, non-abrasive surface cleaning and preparation that eliminates secondary waste, making it the ideal solution for a wide range of sectors, including:

Service Areas

BlasTek covers Southwest Michigan – Benton Harbor, St. Joseph, Holland, South Haven, Niles, and Dowagiac along the I-94/US-31 corridor – and Northern Michigan – Cadillac, Traverse City, Gaylord, Petoskey, and Alpena via US-131 and M-115. We operate from two strategic locations: our Shelbyville headquarters and our Grand Rapids powder coating facility. Our field teams also serve Indiana, Ohio, and Southern Illinois across the Midwest industrial corridor. We proudly serve primary areas including:

What Our Clients Say

Testimonials

Sales and Operations
Clearwater Filtration

Matthew McDonald

BlasTek has completed every project either on schedule or ahead of schedule. They excel with every job in craftsmanship and workmanship. In my mind, they are one of the leaders of the trade in the West Michigan area. Their integrity and determination to provide the best service for their customer are undoubtedly one of the best I have ever seen.

Project Manager
Andy J. Egan Co.

Chad Reed

Over the last few years, we have been utilizing BlasTek LLC for various fabrication projects ranging from semi loads of large-bore carbon steel piping to complex equipment and piping skids. They not only meet the demanding turnaround of our projects but have also expressed great quality and workmanship. Among other things, BlasTek has expressed a willingness to adapt to the specific needs and skillsets of some of our projects.

Advantages of Dry Ice

Advantages of Dry Ice

When it comes to dry ice blasting, there are several advantages associated with a technology that safely removes contaminants without causing harm to the underlying substrate. For example:

Non-Abrasive​

It’s not so much the impact of the dry ice that cleans a surface, but rather, the kinetic energy released from the heat transfer upon impact. The impacted surface is literally frozen by the dry ice pellets which, in turn, causes the weakened contaminants to lose their adhesiveness and break free from the substrate during dry ice blasting.

​No Residual Media​

Since dry ice goes directly from a solid to a gas upon impact, there is no secondary cleanup with dry ice blasting beyond the contaminants being removed. Normally the coatings or contaminants can be swept or vacuumed from the floor beneath the treated object. Whereas chemicals and solvents create environmental concerns, and water carries with it the risk of bacteria growth, dry ice blasting produces zero secondary waste.

No Disassembly​

Dry ice blasting is such a delicate process that equipment need not be disassembled during cleaning. Unlike media blasting and water blasting, there is no waste material produced by CO2 blasting. That means equipment can be cleaned in place, which should reduce plant downtime. In fact, if proper safety procedures are followed, most equipment can be cleaned ‘online’ to increase the amount of heat transfer during cleaning and maximize end results.

Environmentally Friendly​

Dry ice blasting is an EPA, USDA, and FDA approved cleaning process, making it the perfect solution for most industrial and commercial surface decontamination projects.

At BlasTek, we come to work every day

Because we are passionate about what we do.

Contact us