Industrial Blasting, Coating & Painting Services in Kalamazoo, MI

BlasTek delivers industrial blasting, coating, and painting services throughout Kalamazoo, MI, from our Shelbyville headquarters roughly 35 miles north for fast mobilization. We prepare and protect steel, tanks, and process equipment to SSPC, NACE, and AMPP standards for Kalamazoo’s pharmaceutical, medical-device, food-and-beverage, and brewing plants. The full range of services including sandblasting, dry ice and soda blasting, tank lining, industrial painting, and powder coating is available in-shop or on-site. Call (616) 243-7550 to request a quote or on-site assessment.

Corrosion Control, Coatings & Painting for Kalamazoo Industry

Kalamazoo carries one of Michigan’s densest concentrations of process manufacturing: a legacy pharmaceutical corridor, major medical-device production, food and beverage plants, paper and packaging, and a nationally known craft-brewing scene. These facilities need surface prep and coatings that survive washdown, immersion, and strict sanitary requirements. Our crews run straight down US-131 and across I-94, so mobilization to the Kalamazoo-Portage corridor typically takes under an hour.

Industrial Blasting

In Kalamazoo’s process plants, clean and correctly profiled steel is the difference between a coating that lasts and one that fails early. BlasTek strips contamination and establishes the specified anchor profile using engineered media matched to each substrate, never generic silica sand. For sanitary and uptime-sensitive equipment, we reach for gentler methods like dry ice blasting and soda blasting that clean without abrasive damage. Shop and on-site blasting are both available, with engineered containment sized to the environment.

Industrial Coating

Industrial Blasting, Coating & Painting in Kalamazoo, MIKalamazoo’s tanks, vessels, and process equipment operate in demanding, often corrosive service that requires the right coating system, not just any coating. BlasTek applies immersion-grade tank linings, chemical-resistant industrial coatings, and epoxy floor systems built for these conditions. Because roughly 80% of coating failures trace back to surface prep, our inspectors verify profile, soluble-salt levels, and film thickness on every job. We work in our controlled shop or on-site around your production schedule.

Industrial Painting

From structural steel to storage tanks, BlasTek’s industrial painting extends the service life of Kalamazoo’s critical assets. We apply paint systems to specification with continuous film-thickness monitoring, in the field or in our shop. Larger fabrications and high-volume runs move through our shop painting line and Grand Rapids powder coating facility for maximum throughput and quality control. On-site wet-spray painting handles the tanks and equipment that can’t leave the plant.

Full List of Services

BlasTek is a single-source blasting, coating, and painting contractor, so one accountable team can cover surface prep through finish for Kalamazoo, MI projects. Field crews handle on-site work at your facility, and our shops take on parts and fabrications that can travel. Follow any service below for full details, standards, and process on its dedicated page. Choose a focused service or combine several into one scope.

Service Area

BlasTek serves Kalamazoo and the surrounding regions including Portage, Battle Creek, Comstock, Parchment, Galesburg, Vicksburg, and Paw Paw with crews mobilizing along US-131 and I-94. We operate from two strategic locations: our Shelbyville headquarters and our Grand Rapids powder coating facility. Our field teams extend across Michigan, Indiana, Ohio, and Southern Illinois, covering the heart of the Midwest industrial corridor. We proudly serve primary areas including:

Request a Quote or On-Site Assessment

Ready to protect your Kalamazoo, MI assets? Call 616-243-7550 for an immediate answer or submit a contact form to request a quote or schedule an on-site assessment. Our team will evaluate your substrate and service conditions, recommend the right blasting, coating, or painting approach, and provide a detailed estimate.

Frequently Asked Questions – Kalamazoo, MI

How quickly can BlasTek reach a Kalamazoo facility?
Our Shelbyville headquarters is roughly 35 miles from Kalamazoo via US-131, so mobile crews reach most Kalamazoo-area facilities within about 45 minutes for on-site blasting, coating, and painting work.
Do you offer dry ice blasting for pharmaceutical or food plants in Kalamazoo?
Yes. Dry ice (CO2) blasting removes contaminants without water, grit, or secondary residue, making it well suited to Kalamazoo’s pharmaceutical, medical-device, and food-processing equipment where sanitary conditions and uptime matter.
Can you line process and storage tanks in Kalamazoo?
Yes. We provide interior tank lining over near-white or white-metal blast preparation (SSPC-SP10 / SP5), including holiday testing to confirm a continuous, pinhole-free barrier.
Do you work around plant production schedules?
Yes. We routinely schedule blasting, coating, and painting during planned shutdowns, weekends, or off-shifts, with containment engineered to keep adjacent production areas clean and operational.

Industries We Serve

BlasTek specializes in high-performance dry ice blasting and industrial coatings engineered for sensitive and demanding environments. We provide expert, non-abrasive surface cleaning and preparation that eliminates secondary waste, making it the ideal solution for a wide range of sectors, including:

  • Municipal water and wastewater treatment facilities
  • Food and beverage processing plants
  • Pharmaceutical and cleanroom facilities
  • Energy generation and power transmission infrastructure
  • Steel fabricators and structural steel fabrication shops
  • Advanced manufacturing and heavy industry
  • Commercial and industrial construction
  • Environmental and disaster restoration projects

Service Areas

BlasTek operates from two strategic locations: our headquarters in Shelbyville, MI, serving the greater West Michigan region, and our dedicated powder coating facility in Grand Rapids, MI. BlasTek provides dry ice blasting services throughout the Midwest, supported by both in-shop and field capabilities. We proudly serve primary areas including:

  • Grand Rapids, MI
  • Kalamazoo, MI
  • Three Rivers, MI
  • Southwest and Northern Michigan
  • Southern Illinois
  • Northern Indiana
  • Ohio

What Our Clients Say

Testimonials

Sales and Operations
Clearwater Filtration

Matthew McDonald

BlasTek has completed every project either on schedule or ahead of schedule. They excel with every job in craftsmanship and workmanship. In my mind, they are one of the leaders of the trade in the West Michigan area. Their integrity and determination to provide the best service for their customer are undoubtedly one of the best I have ever seen.

Project Manager
Andy J. Egan Co.

Chad Reed

Over the last few years, we have been utilizing BlasTek LLC for various fabrication projects ranging from semi loads of large-bore carbon steel piping to complex equipment and piping skids. They not only meet the demanding turnaround of our projects but have also expressed great quality and workmanship. Among other things, BlasTek has expressed a willingness to adapt to the specific needs and skillsets of some of our projects.

Advantages of Dry Ice

Advantages of Dry Ice

When it comes to dry ice blasting, there are several advantages associated with a technology that safely removes contaminants without causing harm to the underlying substrate. For example:

Non-Abrasive​

It’s not so much the impact of the dry ice that cleans a surface, but rather, the kinetic energy released from the heat transfer upon impact. The impacted surface is literally frozen by the dry ice pellets which, in turn, causes the weakened contaminants to lose their adhesiveness and break free from the substrate during dry ice blasting.

​No Residual Media​

Since dry ice goes directly from a solid to a gas upon impact, there is no secondary cleanup with dry ice blasting beyond the contaminants being removed. Normally the coatings or contaminants can be swept or vacuumed from the floor beneath the treated object. Whereas chemicals and solvents create environmental concerns, and water carries with it the risk of bacteria growth, dry ice blasting produces zero secondary waste.

No Disassembly​

Dry ice blasting is such a delicate process that equipment need not be disassembled during cleaning. Unlike media blasting and water blasting, there is no waste material produced by CO2 blasting. That means equipment can be cleaned in place, which should reduce plant downtime. In fact, if proper safety procedures are followed, most equipment can be cleaned ‘online’ to increase the amount of heat transfer during cleaning and maximize end results.

Environmentally Friendly​

Dry ice blasting is an EPA, USDA, and FDA approved cleaning process, making it the perfect solution for most industrial and commercial surface decontamination projects.

At BlasTek, we come to work every day

Because we are passionate about what we do.

Contact us