Industrial Blasting, Coating & Painting Services in Northern Indiana
BlasTek delivers industrial blasting, coating, and painting across Northern Indiana, with West Michigan facilities just across the state line. We prepare and protect structural steel, tanks, and fabricated assemblies to SSPC, NACE, and AMPP standards for the region’s steel producers, fabricators, RV and heavy-equipment makers, and processors. Our entire range of services, including sandblasting, grit blasting, tank lining, industrial painting, and powder coating, is available in-shop or on-site. Call (616) 243-7550 to request a quote or on-site assessment.
Structural Steel Prep, Coatings & Painting for Northern Indiana Industry
Northern Indiana is one of the Midwest’s most concentrated industrial regions. The northwest corner is steel country which includes primary production, fabrication, and the processors and coaters that support it while the Elkhart-South Bend corridor drives RV, marine, and heavy-vehicle manufacturing, rounded out by food processing and agriculture. Our crews reach the region fast: US-131 south to the Indiana Toll Road (I-80/90) puts South Bend and Elkhart about 90 minutes from our Shelbyville shop, with the Calumet region a straight run west.
Industrial Blasting
High-volume, spec-correct blasting keeps Northern Indiana fabricators and steel producers moving, and BlasTek is built for it. Our crews strip mill scale, rust, and coatings and cut the specified anchor profile on beams, columns, pipe spools, and weldments through industrial sandblasting and grit blasting. We match engineered media to each substrate and verify cleanliness and profile before coating. Controlled shop blasting with heavy-lift capacity and on-site mobile sandblasting are both available across the region.
Industrial Coating
Structural and fabricated steel headed into service needs the right coating system applied over a properly prepared surface. BlasTek applies protective coatings, shop primer, tank linings, and containment systems for Northern Indiana manufacturers and facilities. Our inspectors document dry film thickness and perform holiday testing on immersion assets to confirm a continuous barrier. We coat in our controlled shop for spec-ready delivery or on-site as the project requires.
Industrial Painting
BlasTek’s industrial painting protects Northern Indiana steel and equipment and extends its service life. We apply primers and finish coats to specification with film-thickness monitoring, in the shop or the field. Large structural packages, RV and equipment parts, and high-volume runs move through our shop painting line and Grand Rapids powder coating facility for durable, consistent finishes. On-site painting covers fixed assets that can’t leave the plant.
Full List of Services
BlasTek is a single-source blasting, coating, and painting contractor, so one accountable team can cover surface prep through finish for Northern Indiana projects. Field crews handle on-site work at your facility, and our shops take on parts and fabrications that can travel. Follow any service below for full details, standards, and process on its dedicated page. Choose a focused service or combine several into one scope.
- Industrial Sandblasting
- Industrial Painting
- Industrial Coating Services
- Dry Ice Blasting
- Grit Blasting
- Lead Paint Removal
- Dustless Blasting
- Soda Blasting
- Mobile Sandblasting
- Industrial Cleaning
- Tank Coating & Lining
- Disaster Restoration
- Industrial Containment Services
- Shop Painting Services
- Shop Coating Services
- Powder Coating
Request a Quote or On-Site Assessment
Ready to protect your Northern Indiana assets? Call 616-243-7550 for an immediate answer or submit a contact form to request a quote or schedule an on-site assessment. Our team will evaluate your substrate and service conditions, recommend the right blasting, coating, or painting approach, and provide a detailed estimate.
Frequently Asked Questions – Northern Indiana
These are the most common questions about BlasTek’s blasting, coating, and painting services in Northern Indiana. For anything specific to your project, reach out for a direct answer.
How close is BlasTek to Northern Indiana?
Can you handle high-volume structural steel for Indiana fabricators?
Do you apply shop primer or paint before steel ships?
Do you serve RV and heavy-equipment manufacturers in the Elkhart area?
Industries We Serve
BlasTek specializes in high-performance dry ice blasting and industrial coatings engineered for sensitive and demanding environments. We provide expert, non-abrasive surface cleaning and preparation that eliminates secondary waste, making it the ideal solution for a wide range of sectors, including:
- Municipal water and wastewater treatment facilities
- Food and beverage processing plants
- Pharmaceutical and cleanroom facilities
- Energy generation and power transmission infrastructure
- Steel fabricators and structural steel fabrication shops
- Advanced manufacturing and heavy industry
- Commercial and industrial construction
- Environmental and disaster restoration projects
Service Areas
BlasTek serves Northern Indiana, including Gary, Hammond, and Portage in the Calumet region, plus South Bend, Elkhart, Mishawaka, Goshen, and Warsaw with crews running US-131 to the Indiana Toll Road (I-80/90) and US-31. We operate from West Michigan facilities in Shelbyville and Grand Rapids, just north of the state line. Our field teams also reach Michigan, Ohio, and Southern Illinois across the Midwest industrial corridor. We proudly serve primary areas including:
What Our Clients Say
Testimonials
Sales and Operations
Clearwater Filtration
Matthew McDonald
BlasTek has completed every project either on schedule or ahead of schedule. They excel with every job in craftsmanship and workmanship. In my mind, they are one of the leaders of the trade in the West Michigan area. Their integrity and determination to provide the best service for their customer are undoubtedly one of the best I have ever seen.
Project Manager
Andy J. Egan Co.
Chad Reed
Over the last few years, we have been utilizing BlasTek LLC for various fabrication projects ranging from semi loads of large-bore carbon steel piping to complex equipment and piping skids. They not only meet the demanding turnaround of our projects but have also expressed great quality and workmanship. Among other things, BlasTek has expressed a willingness to adapt to the specific needs and skillsets of some of our projects.
Advantages of Dry Ice
When it comes to dry ice blasting, there are several advantages associated with a technology that safely removes contaminants without causing harm to the underlying substrate. For example:
Non-Abrasive
It’s not so much the impact of the dry ice that cleans a surface, but rather, the kinetic energy released from the heat transfer upon impact. The impacted surface is literally frozen by the dry ice pellets which, in turn, causes the weakened contaminants to lose their adhesiveness and break free from the substrate during dry ice blasting.
No Residual Media
Since dry ice goes directly from a solid to a gas upon impact, there is no secondary cleanup with dry ice blasting beyond the contaminants being removed. Normally the coatings or contaminants can be swept or vacuumed from the floor beneath the treated object. Whereas chemicals and solvents create environmental concerns, and water carries with it the risk of bacteria growth, dry ice blasting produces zero secondary waste.
No Disassembly
Dry ice blasting is such a delicate process that equipment need not be disassembled during cleaning. Unlike media blasting and water blasting, there is no waste material produced by CO2 blasting. That means equipment can be cleaned in place, which should reduce plant downtime. In fact, if proper safety procedures are followed, most equipment can be cleaned ‘online’ to increase the amount of heat transfer during cleaning and maximize end results.
Environmentally Friendly
Dry ice blasting is an EPA, USDA, and FDA approved cleaning process, making it the perfect solution for most industrial and commercial surface decontamination projects.